Dynamix Defender Series 2000VA 1200W 6 Outlet Line Interactive Tower UPS

The Defender range uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage protecting your valuable equipment from power line disturbances. The stylish LCD display, user-replaceable battery and two Australia/NZ sockets make the Defender the complete package at this level. The Defender USB communication port is compatible with Synology NAS products. NetGuard UPS management software included.

• Surge Protection, Best in its Class
• LCD Status Display
• Australian/NZ outlets for UPS and Surge protection
• Buck and boost AVR for voltage stabilisation
• User-replaceable battery
• Silent Operation (No fans included)
• Auto-restart when AC returns
• Off-mode charging
• Cold start function
• USB communication with sophisticated NetGuard® software
• LCD Status Display

• Capacity: 2000VA / 1200W
• Topology: Line Interactive
• Voltage: 240VAC (Nominal)
• Voltage Range: 177~290VAC
• Frequency Range: 50/60Hz ± 5Hz (Auto-sensing)
• Output Voltage: 240VAC±10%
• Frequency: AC mode tracks utility.
• Battery mode: 50Hz±1%
• Frequency Range: 50Hz or 60Hz±1Hz
Transfer Time: 6ms (Typical)
• Waveform (Battery Mode): Simulated Sine Wave
• Outlets :3x Surge Protection and 3x Surge Protection + UPS
• Battery Type & Number: 12Vx9AH (x2)
• Typical Recharge Time: 6 hours recovery to 90% capacity
• Backup Time (50% Load): 5.5mins
• Full Protection: Overload, discharge, thermal, short circuit and overcharge protection
• Surge Protection: 936Joules / 19500Amps
• Interface: USB Interface
• Software: NetGuard supports Windows, Linux, Unix & MAC
• LCD Alarm: AC Mode, Battery Mode, Low Battery (Batt. Mode), Fault, Overload
• Audible Alarm: Battery Mode, Low Battery (Batt. Mode), Fault, Overload
• Temperature: 0°C ~ 40°C
• Humidity: 0% ~ 90% (RH Non-condensing)
• Noise Level: < 5dB (no Fan)
• Dimensions (D x W x H): 397 x 146 x 205mm
• Net Weight: 11.5kg