Planet WGS-5225-8P2S 8 Port Gigabit Ethernet 10/100/1000T Layer 2+ PoE Managed Wall Mountable Industrial Switch + 2x Gigabit SFP

PLANET WGS-5225-8P2S is an Industrial Wall-mount PoE Managed Switch featuring PLANET intelligent PoE functions to improve the availability of industrial applications. It provides IPv6/IPv4 dual stack management and built-in L2+/L4 Gigabit switching engine along with eight 10/100/1000BASE-T ports featuring 36-watt PoE and two additional 1000BASE-X SFP ports. With a total power budget of up to 240 watts for different kinds of PoE applications, and featuring networking speed and operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30 metal housing, the WGS-5225-8P2S is an ideal solution to meet the demand for the following network applications: Building/Home automation network, Internet of things (IoT), and IP surveillance.

Security Building Automation Switch
• Suitable for buildings where security is strictly to be enforced, the WGS-5225-8P2S offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-5225-8P2S, a tightly-controlled network can be easily had in no time.

Different Networks Managed by One Control Center
• Providing up to 8 PoE+, in-line power interfaces, the WGS-5225-8P2S can centrally manage power supplying to an industrial network system where IP phones, IP cameras, wireless APs and more are built. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the WGS-5225-8P2S makes the installation of IP cameras and wireless APs easier and more efficient.

Hardware:
• Copper Ports: 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
• SFP/mini-GBIC Slots: 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 to Port-10), Compatible with 100BASE-FX SFP
• PoE Injector Port: 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8
• Switch Architecture: Store-and-Forward
• Switch Fabric: 20Gbps/non-blocking
• Throughput (packet per second): 14.88Mpps@ 64 bytes packet
• Address Table: 8K entries, automatic source address learning and aging
• Shared Data Buffer: 4Mbits
• Flow Control: IEEE 802.3x pause frame for full duplex, Back pressure for half duplex
• Jumbo Frame: 9Kbytes
• Reset Button: < 5 sec: System reboot, > 5 sec: Factory default
• ESD Protection: 6KV DC
• Enclosure: IP30 metal case
• Installation: DIN rail kit and wall-mount
• Connector: Removable 3-pin terminal block for power input: Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-), Pin 3 for earth ground. DC power jack with 2.0mm central pole
• LED Indicator: System: PWR(Green), Ring (Green), Ring Owner (Green). Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Orange), LNK/ACT (Green). Per SFP Interface: 100 LNK/ACT (Orange), 1000 LNK/ACT (Green).
• Power Requirements: Dual 48~56V DC (>51V DC for PoE+ output recommended)
• Power Consumption: Max. 6.6 watts/22.6BTU (Power on without any connection), Max. 250.4 watts/859.1BTU (Full loading with PoE function)
• Dimensions (W x D x H): 180 x 24.4 x 140 mm
• Weight: 686g

Power Over Ethernet:
• PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
• PoE Power Supply Type: End-span
• PoE Power Output: IEEE 802.3af Standard: Per port 48V~51V DC (depending on the power supply), max. 15.4 watts. IEEE 802.3at Standard: Per port 51V~56V DC (depending on the power supply), max. 36 watts
• Power Pin Assignment: 1/2(+), 3/6(-)
• PoE Power Budget: 240W maximum (depending on power input)
• Max. number of Class 2 PDs: 8
• Max. number of Class 3 PDs: 8
• Max. number of Class 4 PDs: 8

Layer 2 Function:
• Basic Management Interfaces: Console; Telnet; Web browser; SNMP v1, v2c
• Secure Management Interfaces: SSH, SSL, SNMP v3
• Port Configuration: Port disable/enable, Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Power saving mode control
• Port Status: Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
• Port Mirroring: TX/RX/both, 1 to 1 monitor
• VLAN: 802.1Q tag-based VLAN, up to 255 VLAN groups, Q-in-Q tunneling, Private VLAN Edge (PVE), MAC-based VLAN, Protocol-based VLAN, Voice VLAN, MVR (Multicast VLAN Registration), Up to 255 VLAN groups, out of 4094 VLAN IDs
• Link Aggregation: IEEE 802.3ad LACP/static trunk, Supports 2 trunk groups with 2 ports per trunk group
• QoS: Traffic classification based, strict priority and WRR. 8-level priority for switching: Port number, 802.1p priority, 802.1Q VLAN tag, DSCP/TOS field in IP packet
• IGMP Snooping: IGMP (v1/v2/v3) snooping, up to 255 multicast groups, IGMP querier mode support
• MLD Snooping: MLD (v1/v2) snooping, up to 255 multicast groups, MLD querier mode support
• Access Control List: IP-based ACL/MAC-based ACL, Up to 256 entries
• Bandwidth Control: Per port bandwidth control, Ingress: 500Kb~1000Mbps, Egress: 500Kb~1000Mbps
• SNMP MIBs: RFC 1213 MIB-II, IF-MIB, RFC 1493 Bridge MIB, RFC 1643 Ethernet MIB, RFC 2863 Interface MIB, RFC 2665 Ether-Like MIB, RFC 2819 RMON MIB (Groups 1, 2, 3 and 9), RFC 2737 Entity MIB, RFC 2618 RADIUS Client MIB, RFC 2933 IGMP-STD-MIB, RFC 3411 SNMP-Frameworks-MIB, IEEE 802.1X PAE, LLDP, MAU-MIB

Layer 3 Function:
• IP Interfaces: Max. 8 VLAN interfaces
• Routing Table: Max. 32 routing entries
• Routing Protocols: IPv4 software static routing, IPv6 software static routing

Standards Conformance:
• Regulatory Compliance: FCC Part 15 Class A, CE
• Stability Testing: IEC60068-2-32 (free fall), IEC60068-2-27 (shock), IEC60068-2-6 (vibration)
• Standards Compliance: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3z Gigabit SX/LX, IEEE 802.3ab Gigabit 1000T, IEEE 802.3x flow control and back pressure, IEEE 802.3ad port trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, IEEE 802.1Q VLAN tagging, IEEE 802.1X Port Authentication Network Control, IEEE 802.1ab LLDP, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, ITU-T G.8032 Ethernet Ring Protection Switching, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP v1, RFC 2236 IGMP v2

Environment:
• Operating Temperature: -20 ~ 70 degrees C
• Storage Temperature: -40 ~ 85 degrees C
• Humidity: 5 ~ 95% (non-condensing)