Cisco Meraki MR44 High Performance 2x2:2 PoE Wi-Fi 6 Wireless Cloud Managed Indoor Access Point

The Cisco Meraki MR44 is a cloud-managed 2x2:2 + 4x4:4 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR44 offers high throughput, enterprise-grade security, and simple management.

• 2x2:2 (2.4GHz) + 4x4:4 (5GHz) MU-MIMO 802.11ax
• 3 Gbps* dual-radio aggregate frame rate
(* Refers to maximum over-the-air data frame rate capability of the radio chipset, and may exceed data rates allowed by IEEE 802.11ax operation.)
• 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
• Integrated Bluetooth Low Energy Beacon
• Integrated scanning radio
• Enhanced transmit power and receive sensitivity
• Integrated enterprise security and guest access
• Application-aware traffic shaping
• Optimized for voice and video
• Self-configuring, plug-and-play deployment
• Sleek design blends into office environments
• Full-time Wi-Fi location tracking via dedicated 3rd radio

Radios:
• 2.4 GHz 802.11b/g/n/ax client access radio
• 5 GHz 802.11a/n/ac/ax client access radio
• 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon support
• Concurrent operation of all four radios
• Max aggregate frame rate: 3 Gbps
• Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz, 5.150-5.250 GHz (UNII-1), 5.250-5.350 GHz (UNII-2), 5.470-5.600, 5.660-5.725 GHz (UNII-2e), 5.1725-5.825 GHz (UNII-3)

Antenna:
• Internal Antenna (5.1dBi max gain at 2.4 GHz, 5.9dBi max gain at 5 GHz)
• Individual antenna elements for each radio

802.11ax, 802.11ac Wave 2 and 802.11n Capabilities:
• DL-OFDMA**, UL-OFDMA**, TWT support**, BSS colouring**
(**Features can be enabled via future firmware updates)
• 2.4GHz: 2 x 2 multiple input, multiple output (MIMO) with two spatial streams
• 5GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
• SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
• Maximal ratio combining (MRC) and beamforming
• 20 and 40 MHz channels (802.11n)
• 20, 40, and 80 MHz channels (802.11ac Wave 2)
• 20, 40 and 80 MHz channels (802.11ax)
• Up to 1024 QAM on both 2.4 GHz and 5 GHz bands
• Packet aggregation

Power:
• Power over Ethernet: 42.5 - 57 V (802.3at) or 37 - 57 V (802.3af) - low power mode ***
(***Feature can be enabled for required networks)
• Alternative 12 V DC input
• Power consumption: 30W max (802.3at) or 18W max (802.3af) - low power mode ***
(***Feature can be enabled for required networks)
• Power over Ethernet injector and DC adapter sold separately

Interfaces:
• 1x 100/1000/2.5G BASE-T Ethernet
• 1x DC power connector (5.5 mm x 2.5 mm, centre positive)

Mounting:
• All standard mounting hardware included
• Desktop, ceiling and wall mount capable
• Ceiling tile rail (9/16, 15/16, or 1 1/2" flush or recessed rails), assorted cable junction boxes
• Bubble level on mounting cradle for accurate horizontal wall mounting

Physical Security:
• Two security screw options included
• Kensington lock hard point
• Concealed mount plate with anti-tamper cable bay

Environment:
• Operating temperature: 0 °C to 40 °C
• Humidity: 5 to 95% non-condensing

Physical Specifications:
• Dimensions: 30.6 cm x 12.84 cm x 4.43 cm, not including desk mount feet or mount plate
• Weight: 739 g

Security:
• Integrated Layer 7 firewall with mobile device policy management
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
• Flexible guest access with device isolation
• VLAN tagging (802.1Q) and tunnelling with IPSec VPN
• PCI compliance reporting
• WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
(**Features can be enabled via future firmware updates)
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
• TKIP and AES encryption
• Enterprise Mobility Management (EMM) and Mobile Device Management (MDM) integration
• Cisco ISE integration for guest access and BYOD posturing

Quality of Service:
• Advanced Power Save (U-APSD)
• WMM Access Categories with DSCP and 802.1p support
• Layer 7 application traffic identification and shaping

Mobility:
• PMK, OKC, and 802.11r for fast Layer 2 roaming
• Distributed or centralized Layer 3 roaming

Analytics:
• Embedded location analytics reporting and device tracking
• Global L7 traffic analytics reporting per network, per device, and per application

Note: Meraki access point license required.