DAHLE 104 Deskside 16 Sheet 40L P-2 Strip Cut Document Shredder

A deskside document shredder for performance and convenience directly at the your desk. Convenient swivel casters with brake for reliably keeping the document shredder firmly in place. Eco-friendly with automatic motor cut-out after 30 minutes without use.

• Convenient feed and reverse function for manual control
• Intelligent document shredder for desk-side use
• Convenient automatic reversing function clears feed opening after feeding in too much paper
• Automatic shredding stop and optical signal in control panel when bin full
• Motor cuts out automatically when waste bag is full or door is open
• Separate CD feed opening and waste box for reliable, environmentally friendly shredding
• Powerful motor for high capacity and longer running times
• Clearly designed, user-friendly control panel with illuminated information and function unit and acoustic signals
• Electronic start-stop function controlled by integrated light barrier
• High-quality, solid-steel cutters in special steel for a guaranteed long service life
• Extremely quiet operation for a particularly pleasant working atmosphere
• Widely opening doors for ease of emptying the waste bag
• Convenient swivel casters providing 5 cm floor clearance for greater mobility and two brakes for keeping the shredder firmly in place
• Separate main switch for completely shutting down the document shredder
• Practical IEC power connector can be unplugged from the document shredder

• Entry width: 240 mm
• Shreds A4 80 gsm paper: 16 sheets
• Shred width in mm: 5.8 mm
• Security levels: P-2/O-2/T-2/E-2
• Waste collection volume: 40 L
• dB (A) when idle: 47 dB(A)
• Speed: 6 m/min
• Wattage: 350 W
• Dimensions (H x W x D): 705 x 430 x 350 mm
• Weight (approx.): 25 kg

Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.