DAHLE 706 Departmental 5 Sheet 60L P-7 Micro Cut Document Shredder

A departmental document shredder for professional performance across the team. Convenient swivel casters with brake for reliably keeping the document shredder firmly in place. With automatic motor cut-out after 30 minutes without use.

• Convenient feed and reverse function for manual control
• Convenient automatic reversing function clears feed opening after feeding in too much paper
• Automatic shredding stop and optical signal in control panel when bin full
• Motor cuts out automatically when waste bag is full or door is open
• With automatic motor cut-out after 30 minutes without use
• Powerful motor for high capacity and longer running times
• Clearly designed, user-friendly control panel with illuminated information and function unit and acoustic signals
• Electronic start-stop function controlled by integrated light barrier
• High-quality, solid-steel cutters in special steel for a guaranteed long service life
• Extremely quiet operation for a particularly pleasant working atmosphere
• Widely opening doors for ease of emptying the waste bag
• Convenient swivel casters providing 5 cm floor clearance for greater mobility and two brakes for keeping the shredder firmly in place
• Separate main switch for completely shutting down the document shredder
• Practical IEC power connector can be unplugged from the document shredder
• Team document shredder for professional use
• Integrated oil tank for automatically oiling the cutters in all models providing P-6 and P-7 security

• Entry width: 260 mm
• Shreds A4 80 gsm paper: 5 sheets
• Shred width in mm: 1 x 4,7 mm
• Security levels: P-7/F-3/T-6
• Waste collection volume: 60 L
• dB (A) when idle: 50 dB(A)
• Speed: 6.5 m/min
• Wattage: 650 W
• Dimensions (H x W x D): 865 x 545 x 435 mm
• Weight (approx.): 43 kg

Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.