Lenkeng 1-In-2-Out 4K@60Hz HDMI Extender

1-In-2-Out 4K@30Hz HDMI Extender. Distributes 1 HDMI input signal to 2 identical signal outputs, extending these signals up to 70m. Supports 4K@60Hz resolution, IR passbacks, RS-232 control and other functions.

• Zero-latency transmission
• Split and extend on HDMI input signal to two identical network output signals
• Supports 4K@30Hz via CAT6/6A/7 network cable, maximum at transmission distance of up to 70m
• Supports IR passback (20KHz ~ 60KHz)
• Transmitter supports HDMI loop out
• Receiver can output the digital audio of source device from S/PDIF port
• Supports EDID passthrough or manually set the EDID of the product
• Surge protection, lightning protection, ESD protection
• Equipped with rack mount ears
• Supports PoE, only the transmitter is required to supply power

• Transport protocol: ipcolor
• Split mode: 1 IN 2 OUT
• Input: 1xHDMI
• Output: 8xRJ45
• HDMI signal: HDMI 2.0 compatible with HDCP 2.2
• PoE: Support
• Resolution: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900, 1024x768, 800x600, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz
• Transmission Distance: CAT6/6A/7≤70m
• HDMI LOOP OUT: Support up to 4K@60Hz loop output
• IR pass back: Support IR pass back, Support 20-60khz IR devices
• EDID Support: EDID passthrough and EDID switch
• RS-232: Support RS-232 command control
• Protection: ESD protection, surge protection, lightning protection
• Working Temperature: -20°C~60°C
• Storage Temperature: -30°C~70°C
• Humidity (no condensation): 0%~90%
• Power supply: TX: DC12V/3A
• Power consumption: TX < 13W RX < 4W
• Weight: TX: 650g RX: 243g
• Material: Iron
• Housing: TX: Iron, RX: Aluminium alloy material+crystal panel
• Dimensions (L×W×H mm): TX: 272.0(L) x 96.5(W) x 23.0(H) mm, RX: 75.0(L) x 80.0(W) x 18.0(H)mm