TP-Link MC100CM 10/100M RJ45 to 100M Multi-mode SC Fiber Converter

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

• Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
• Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
• Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
• Extend fiber distance up to 2km
• Easy-to-view LED indicators provide status to monitor network activity easily
• External power supply

• Half/Full-Duplex transfer mode for FX port
• Full Duplex Flow Control (IEEE 802.3x)
• Half Duplex Flow Control (Backpressure)
• Extends fiber distance up to 2km
• Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
• Ports: 1x 100M SC port; 1x 100M RJ45 port (Auto MDI/MDIX)
• Wave Length: 1310nm
• Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m); EIA/TIA-568 100? STP (maximum 100m)
• Network Media 100BASE-T: UTP category 5, 5e cable (maximum 100m); EIA/TIA-568 100? STP (maximum 100m)
• Network Media 100BASE-FX: Multi-mode Fiber
• LED Indicators: PWR, FDX/Col, Link/Act, SPD
• Power Supply: External power supply
• Operating Temperature: 0~40 (32~104)
• Storage Temperature: -40~70 (-40~158)
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing
• Dimensions (W x D x H): 94.5 x 73.0 x 27.0mm