StarTech 1080p HDMI Video over IP Gigabit LAN Receiver

Broadcast your HDMI signal to multiple locations throughout your site, using your existing network infrastructure. The HDMI over IP receiver works with the HDMI over IP Extender (ST12MHDLNHK) to distribute HDMI to an additional remote display. You can add multiple receivers (each sold separately) to easily distribute HDMI to multiple locations.

Customize your video distribution with a scalable solution
• With additional receivers, you can scale your HDMI over IP kit installation to suit your needs. In a point-to-multipoint setup, you can route HDMI over IP to as many receivers as you need. For additional scalability, you can combine up to 99 different kits (ST12MHDLNHK) to create a multipoint-to-multipoint setup, where you can route different HDMI source signals to different displays. Mounting hardware and IR extenders are included for each transmitter and receiver to ensure tidy, professional installation and hassle-free remote operation.

Get brilliant video at HD 1080p
• The receiver maintains your HD video signal, supporting resolutions up to 1080p. Maintaining your HD quality over IP makes it easy to distribute dynamic digital signage throughout your site to attract and engage customers.

Save your network bandwidth with video compression
• Unlike some video-over-IP solutions that consume your bandwidth, this HDMI over IP solution uses video compression to distribute high-quality HDMI over your local area network, with minimal bandwidth requirements. Extending your HDMI using compression saves your network resources, avoiding the hassle of a separate video network.

Hardware:
• Audio: Yes
• Cabling: Cat 5e UTP or better
• Daisy-Chain: Yes
• Ports: 1
• Rack-Mountable: Yes

Performance:
• Audio Specifications: 2-channel
• Max Distance: 15 m / 50 ft
• Maximum Cable Length: 15.2 m
• Maximum Digital Resolutions: 1920x1200 (1080p) 60Hz
• Supported Resolutions: 1920x1200 60Hz
• Wide Screen Supported: Yes

Connector(s):
• Remote Unit Connectors: 1x HDMI (19 pin) Female Output, 1x RJ-45 Female Input, 1x 2.5 mm Mini-Jack (3 Position) Female, 1x Infrared Female

Indicator:
• LED Indicators: 1 - status LED

Power:
• Input Current: 0.3 A
• Input Voltage: 100 - 240 AC
• Output Current: 1 A
• Output Voltage: 5 DC
• Plug Type: USB Mini-B (5 pin)
• Power Source: AC Adapter Included

Environmental:
• Humidity: 0% - 80 %
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Storage Temperature: -10°C to 60°C (14°F to 140°F)

Physical Characteristics:
• Color: Black
• Enclosure Type: Aluminum
• Product Height: 2.8 cm
• Product Length: 13 cm
• Product Width: 97 mm
• Weight of Product: 448 g

Note:
• Your router must support IGMP snooping. Please refer to your network switch or router documentation to ensure IGMP snooping is supported and enabled
• Each kit requires 6 to 12mbps of local area network bandwidth, when in operation

• 1x HDMI over IP receiver
• 1x universal power adapter (NA, EU, UK, ANZ)
• 1x mounting bracket
• 1x CAT5 cables
• 1x plastic screwdriver
• 1x IR remote control
• 1x USB-A to Mini USB-B cable
• 1x DB9 to 2.5 mm serial adapter cable
• 1x IR receiver
• 4x rubber feet
• 1x instruction manual