StarTech HDMI over Fibre Full HD 1080p HDBaseT Extender Kit with IR Control - 1x Transmitter, 1x Receiver

The ST121HDFXA is a long-range HDMI video extender kit that uses SC fiber optic cable to extend video/audio from an HDMI-equipped device to a remote display up to 2600 feet (800 Meters) away. The extender supports full High-Definition video (1920x1200 / 1080p) and includes both the transmitter and receiver, for a complete ready-to-use digital signage solution. Not only is this an incredibly long range solution that can extend an HDMI signal across or between buildings, but because fiber optics transmit data using light rather than copper, it will not cause or be effected by electromagnetic Interference (EMI). For convenient, time-saving control of the media source, the HDMI extender also offers Infrared (IR) extension, which enables you to control the HDMI audio-video source from either end of the connection. The kit also includes optional mounting hardware for a clean and professional installation.

• Extend HDMI video up to 2600ft (800m)
• Resolutions up to 1080p (1920x1200)
• Local transmitter and remote receiver units included
• Supports bi-directional IR communication
• Uses SC fiber optic cabling
• Ready for use with Blu-ray players
• No software or drivers required

Hardware
• Audio: Yes
• Cabling: Fiber Optic
• Daisy-Chain: No
• Ports: 1
• Rack-Mountable: Yes

Performance
• Audio Specifications: Supports Dolby TrueHD, DTS-HD MA
• IR Interface: Bi-directional, 38Khz / +/- 10 degrees / 5M
• Max Distance: 800 m / 2600 ft
• Maximum Cable Length: 2599.3 ft [792.5 m]
• Maximum Data Transfer Rate: HDMI - 3.4Gbps
• Maximum Digital Resolutions: 1080p @ 60Hz, 48-bit
• Supported Resolutions - 50 / 125 Multimode cabling: 800 m at 1080p, 1200 m at 1080i
• Supported Resolutions - 62.5 / 125 Multimode cabling: 350 m at 1080p, 450 m at 1080i
• Wide Screen Supported: Yes

Connector(s)
• Local Unit Connectors: 1 - HDMI (19 pin) Female, 1 - Fiber Optic SC Duplex Female, 1 - IrDA (Infrared, SIR/FIR) Female
• Remote Unit Connectors: 1 - HDMI (19 pin) Female, 1 - Fiber Optic SC Duplex Female, 1 - IrDA (Infrared, SIR/FIR) Female

Power
• Center Tip Polarity: Positive
• Input Voltage: 9 ~ 12 DC
• Output Current: 1.5A
• Plug Type: M
• Power Consumption (In Watts): 18
• Power Source: 2 AC Adapters Included

Environmental
• Humidity: 0-80%
• Operating Temperature: 0 C to 40 C
• Storage Temperature: -10 C to 60 C

Physical Specifications
• Color: Black
• Enclosure Type: Steel
• Dimensions (HxLxW): 26 x 129 x 97 mm
• Weight: 457 g

Special Notes / Requirements
• Note: If your video source is HDCP encrypted, your connected display MUST be HDCP compliant. If the extender detects a non-HDCP compliant display while you’re extending an HDCP encrypted video source, the content will not display
• System and Cable Requirements Multi-mode fiber cabling (50/125 or 62.5/125) terminated with SC duplex connectors, is required to connect the transmitter to the receiver.

• 1x Local HDMI Extender Unit
• 1x Remote HDMI Receiver Unit
• 1x IR Receiver Cable
• 1x IR Transmitter Cable
• 2x Mounting Brackets
• 1x 7 ft [2.1 m] Multi-mode SC-SC duplex Fiber Optic cable
• 2x Foot Pad Set
• 2x Universal Power Adapter NA / UK / EU
• 1x User Manual