StarTech 2-Port VGA Auto Switch - Black

The ST122VGAU VGA Auto Switcher lets you share a display between two computers and prioritize your VGA signals. The VGA switch features a primary and secondary VGA input port, and automatically outputs the signal from the primary input. When the signal feed connected to the primary input port is cut, the switcher automatically defaults to the video signal on the secondary VGA input port.

• Automatically selects the priority of incoming video signals for display
• Supports resolutions up to 1920x1440
• Easy to use front panel selection buttons

Hardware:
• Audio: No
• AV Input: VGA
• AV Output: VGA
• Industry Standards: DDC1, DDC2, DDC2B, DDC2B+, DDC2AB ( DDC Support on Port 1 only)
• Ports: 2

Performance:
• Bandwidth: 250 MHz
• MTBF: 80,000 hours
• Wide Screen Supported: Yes

Connectors(s):
• Connector A: 2 - VGA (15 pin, High Density D-Sub) Female
• Connector B: 1 - VGA (15 pin, High Density D-Sub) Female

Power:
• Center Tip Polarity: Positive
• Output Current: 0.3A
• Output Voltage: 9V DC
• Power Consumption (In Watts): 2.7
• Power Source: AC Adapter Included

Physical Characteristics:
• Color: Black
• Material: Steel

• Note: Port 1 is set to have higher priority than port 2 when both signals are on

• 1x 2 Port VGA Auto Switch
• 1x Universal Power Adapter (US/UK/EU/AUS)
• 1x Instruction Manual